Flexi 360
Flexible Guide Posts
PICKET DRIVABLE ANCHOR
Pro Drivable Anchor
SURFACE MOUNT PLATE
THE WORLDS MOST FLEXIBLE GUIDE POST
The Dura-Post® Flexi360 Flexible Guide Post with picket drivable anchor, is a system within itself, the connecting flexible joint and the HDPE, High-Density Polyethylene sheath are individual products that can be ordered separately. After initial installation, separately the post top can be replaced at any time without the need to dig another hole or drive another post in its place.
The Flexi360 flexible guide post system is Australian made, recyclable, and complies with:
British & European Standard E N 12899 – 3:2008
Australian Standard AS 1742.2 and AS/NZ 1906.1
FLEXI360 GUIDE POST SYSTEM
The Dura-Post® Flexi360 Flexible Guide Post system is designed for quick and easy replacement of sheath after impact. The Flexi360 drivable anchor comes as a spade or picket drivable anchor for easy installation into any unsealed surfaces. Separating the anchor and post top makes Flexi-360 the best choice for use on medium to high impact zones, in urban regional and rural areas.
Supported by a 10-year guarantee, Flexi360 products significantly reduce your maintenance and replacement costs.
FLEXI360 GUIDE POST INSTALLATION OPTIONS
The Dura-Post® Flexi360 Flexible Guide Post is a system within its self. A drivable anchor, connecting flexible joint and the HDPE. High-Density Polyethylene post tops are individual products. After initial installation, the post top can be replaced at any time without the need to dig another hole or drive another post in its place. With 3 installation options, the Flexi360 system suits any situation and road conditions.
FLEXi360 Guide Posts
FLEXI360 PICKET DRIVABLE ANCHOR
Perfect for unsealed roads and rural environments, The Dura-Post® Flexi360 Flexible Guide Post system has a spade or picket drivable anchor, connecting flexible joint and HDPE sheath. The Flexi360 post top can be replaced easily and is driven directly into the ground or road base using manual or mechanical drivers.
FLEXI360 GUIDE POSTS
FLEXI360 PRO DRIVEABLE ANCHOR
Designed for bitumen and asphalt surfaces, the Flexi360 Pro flexible guide post is the most efficient delineator post system to install with drivable anchor. It can be mechanically driven in minutes using the Flexi360 Pro series driver attachment, safer for installers, and replaces difficult manual installation methods.
FLEXI360 GUIDE POSTS
FLEXI360 SURFACE MOUNT
Made for concrete surfaces such as freeways, bridges, tunnels, and barriers, Flexi360 Surface Mount installation can be easily installed with a surface mount plate, bolted or glued down to concrete surfaces. The Flexi360 Surface Mount is perfect for concrete surfaces in low to high impact zones and can be be supplied with angle plates for bridge curbing.
TECHNICAL SPECIFICATIONS
The Dura-Post® Flexi360 Flexible Guide Post is a system within its self. A drivable anchor, connecting flexible joint and the HDPE. High-Density Polyethylene post tops are individual products. For your convenience can be ordered and replaced separately. After initial installation, the post top can be replaced at any time without the need to dig another hole or drive another post in its place.
The Flexi 360 flexible guide post system is 100% Australian made and recyclable and complies with:
British & European Standard E N 12899 – 3:2008 & Australian Standard AS 1742.2 and AS/NZ 1906.1
Approved and accepted in all states and territories in Australia. The Flexi360 is above ground height by 1000mm white post available with a full range of installation options. With over a million Flexi360 posts installed around Australia, they continue to stand the test of time.
Formulated from a High Impact UV stabilised premium quality polyethylene post top or sheath which is mould resistant, self-extinguishing and will not support combustion. Tested for 2000 hours for extreme weather conditions. The 360o Flexible Joint is fire retardant.
The Flexi360 reboundable joint sits above ground allowing the post to rebound 360 degrees back to upright, ensuring it self-aligns to the vertical position after sustaining several severe impacts from vehicles travelling from any direction.
Installation using a separate drivable anchor makes for easy installation and replacement when required. The anchor can be driven with a manual driver or petrol driver, a pneumatic driver or jackhammer. This option is a vandal resistant method of retention.
SUITABLE FOR
- High Impact Zone
- Medium impact Zone
- Low Impact Zone
- Urban, Rural and Regional Areas
BENEFITS
- Saves time with quick installation
- Low maintenance, post rebounds to vertical after repeated impacts
- High impact resistance for longer lifespan.
- Complies with Australia standards
- Self-extinguishing and will not support combustion
- Guaranteed for 10+ years
- Australian Made & 100% Recyclable
Download the Flexi360 brochure here.